adafruit_ble_berrymed_pulse_oximeter

adafruit_ble_berrymed_pulse_oximeter

BLE Support for Berrymed Pulse Oximeters

• Author(s): Adafruit Industries

Implementation Notes

Hardware:

• BM1000, made by Shanghai Berry Electronic Tech Co.,Ltd. Device labeling is not consistent. May be identified on device label, box, or in BLE advertisement as BM1000, BM1000B, BM1000C, or BM1000E.

  Protocol defined here:

  • https://github.com/zh2x/BCI_Protocol.

  Thanks as well to:

  • https://github.com/ehborisov/BerryMed-Pulse-Oximeter-tool
  • https://github.com/ScheindorfHyenetics/berrymedBluetoothOxymeter

Software and Dependencies:

• Adafruit CircuitPython firmware for the supported boards: https://github.com/adafruit/circuitpython/releases

class adafruit_ble_berrymed_pulse_oximeter.BerryMedPulseOximeterService(service=None)

Service for reading from a BerryMed BM1000C or BM100E Pulse oximeter.

values

All the pulse oximeter values, returned as a PulseOximeterValues namedtuple.

Return None if no data available.

class adafruit_ble_berrymed_pulse_oximeter.PulseOximeterValues(valid, spo2, pulse_rate, pleth, finger_present)

Namedtuple for measurement values.

• PulseOximeterValues.valid

  True if sensor readings are not valid right now

• PulseOximeterValues.finger_present

  True if finger present.

• PulseOximeterValues.spo2

  SpO2 value (int): 0-100%: blood oxygen saturation level.

• PulseOximeterValues.pulse_rate

  Pulse rate, in beats per minute (int).

• PulseOximeterValues.pleth

  Plethysmograph value, 0-100 (int).

For example:

bpm = svc.values.pulse_rate

finger_present

Alias for field number 4

pleth

Alias for field number 3

pulse_rate

Alias for field number 2

spo2

Alias for field number 1

valid

Alias for field number 0

adafruit_ble_berrymed_pulse_oximeter.adafruit_ble_transparent_uart

This module provides Services used by MicroChip

class adafruit_ble_berrymed_pulse_oximeter.adafruit_ble_transparent_uart.TransparentUARTService(service=None)

Provide UART-like functionality via MicroChip

Parameters:

• timeout (int) – the timeout in seconds to wait for the first character and between subsequent characters.
• buffer_size (int) – buffer up to this many bytes. If more bytes are received, older bytes will be discarded.

in_waiting

The number of bytes in the input buffer, available to be read.

read(nbytes=None)

Read characters. If nbytes is specified then read at most that many bytes. Otherwise, read everything that arrives until the connection times out. Providing the number of bytes expected is highly recommended because it will be faster.

Returns:Data read Return type:bytes or None

readinto(buf, nbytes=None)

Read bytes into the buf. If nbytes is specified then read at most that many bytes. Otherwise, read at most len(buf) bytes.

Returns:number of bytes read and stored into buf Return type:int or None (on a non-blocking error)

readline()

Read a line, ending in a newline character.

Returns:the line read Return type:bytes or None

reset_input_buffer()

Discard any unread characters in the input buffer.

write(buf)

Write a buffer of bytes.